Replacing carpeted stairs with hardwood means removing the carpet and padding, then either refinishing the existing treads underneath or capping the structure with new hardwood treads and risers. It is one of the highest-impact upgrades in a home, it ends the trapped dust and winter grit a carpet holds, and when the treads match your floors the staircase finally looks like it belongs.

Why Homeowners Ditch Carpeted Stairs?

Carpet on stairs wears in a straight line down the middle, traps dust and allergens, and holds every bit of salt and sand a Quebec winter tracks in. It also dates a house. When a client tells me the carpet runner looks tired, the real issue is usually that the stairs feel like the one unfinished part of an otherwise updated home.

Hardwood solves all of it at once. It cleans with a dry mop, it shrugs off traffic, and it connects the staircase visually to the floors above and below. In an open-concept home where the stair sits in the main living space, that visual connection is the difference between a staircase that disappears and one that anchors the room.

Is Your Staircase A Good Candidate?

Not every carpeted stair hides good wood. Builders often carpet stairs precisely because the treads underneath are construction-grade pine or plywood, never meant to be seen. So the first question is what is under the carpet, and that decides the whole project.

If solid hardwood treads are underneath, they can often be refinished. If the treads are plywood, pine, or a rough stringer, the better route is to cap the staircase with new hardwood treads and risers built to be seen. We lift a corner of the carpet during the site visit to find out before quoting anything.

The Conversion Process, Step By Step

Stage What Happens Typical Timing
Remove Carpet, padding, tack strips, and staples pulled Half a day
Assess Inspect treads, check for squeaks and damage Same visit
Prepare Repair, level, and quiet the structure Varies
Cap or Refinish Install new treads and risers, or sand and finish One to a few days
Finish and Cure Stain, seal, and let the finish harden Several days of light use

The messy part is the removal, hundreds of staples and the tack strips, and the slow part is the finish curing. Capping is cleaner and faster than a full on-site refinish because the treads arrive prefinished, but the right method depends entirely on what the removal reveals.

Matching Treads To Your Floors

This is where the project succeeds or disappoints. New stair treads should agree with your existing floors in species, stain, and sheen, so the eye reads the stairs and the floor as one surface rather than two near-misses.

Matching is harder than it sounds, because stair treads are thicker stock than flooring and can take stain differently, and a floor that has aged for years has shifted colour. We sample the stain on the actual tread material against your floor before committing, and when a perfect match is not realistic, a deliberate two-tone look, dark treads with white risers, reads as a design choice rather than a mismatch. Our hardwood collections and the detailing in our stair railings guide help pull the whole staircase together.

Safety And Noise, Handled Properly

Bare hardwood stairs are harder and more slippery than carpet, so safety detailing matters. A proper rounded nosing on each tread, a consistent rise and run, and a code-compliant handrail and guard keep the staircase safe, and the Régie du bâtiment du Québec sets the dimensions those details have to meet. Where slip is a worry, a low-sheen finish grips better than a high gloss, and a runner can be added back over the wood for traction without hiding it entirely.

Noise is the other change. Carpet muffles footsteps, so a newly bare staircase sounds louder until the squeaks are addressed. Good installers screw and glue treads to the stringers and add quieting between the components during the prep stage, which is why that unglamorous step matters. If the staircase borders a bedroom wall, this is worth getting right.

Also Read – Floating & Open-Riser Staircases for Quebec Homes

What The Finished Result Looks Like

Done well, the staircase stops being the tired part of the house and becomes a feature. The treads catch light, the lines are clean, and the connection to your floors makes the whole level feel intentional.

“People brace themselves for a huge job and then the carpet comes off and we find solid oak treads nobody knew were there,” says Sefi Dollinger, Owner of Planchers Bellefeuille, who has rebuilt and refinished Quebec staircases since 1983. “Other times it is plywood and we cap it, and that looks even better because the treads are made to be seen. Either way the staircase goes from the thing people apologize for to the thing they show off. Just do not skip the squeak work under the treads, because a beautiful stair that creaks drives you crazy for years.”

Frequently Asked Questions

Can any carpeted staircase be converted to hardwood?

Almost any staircase can, but the method depends on what is under the carpet. If solid hardwood treads are underneath, they can often be refinished. If the treads are plywood or construction-grade pine, the staircase is capped with new hardwood treads and risers instead. We check by lifting a corner of the carpet before quoting.

Is it cheaper to refinish existing stair treads or install new ones?

Refinishing existing solid treads is usually less costly when the wood underneath is sound, since you are sanding and finishing rather than buying new material. Capping with new treads and risers costs more but is the right call, and often the better-looking result, when the existing treads were never meant to be seen.

Are hardwood stairs slippery and loud?

They are harder and can be more slippery than carpet, so a rounded nosing, a consistent rise and run, a low-sheen finish, and a code-compliant handrail all matter. They are also louder until the treads are properly screwed, glued, and quieted during installation, which is why the prep step should not be skipped.

Do new stair treads have to match my floors?

They should agree with your floors in species, stain, and sheen so the staircase and floor read as one. Because tread stock is thicker and takes stain differently, we sample the match first. When an exact match is not realistic, a deliberate two-tone look reads as a design choice.

How long does it take to replace carpet on stairs with hardwood?

Removal takes about half a day, and the install or refinish takes one to a few days depending on the method. If the stairs are refinished on site, the finish then needs several days to cure, during which the staircase should see only light use.

Book a site visit and we will lift the carpet to see what you are working with, then give you a straight recommendation and a quote. Visit the Saint-Jerome showroom to see tread and stain options in person.