A floating staircase has treads that appear to hang in the air with no visible supports, usually anchored to a hidden steel stringer or bolted into a side wall. An open-riser staircase leaves the space between treads open instead of closing it with a vertical riser board. Both read as light and modern, and both still have to meet the Quebec Construction Code.

The Staircase as a Centrepiece

Most stairs are built to be used and ignored. A floating stair is built to be looked at. When you remove the risers and hide the structure, the staircase stops being a solid wall of wood and becomes a series of planes with light passing through them, which is why architects reach for it in open-concept homes where the stair sits in the main living space.

I walked a client through our Saint-Jerome showroom last winter who had planned a closed oak staircase, and once she saw an open-riser tread sample cantilevered off the wall, the whole project changed. The look does something a photo cannot. It opens sightlines, it lets a stairwell window throw light deeper into the room, and it makes a small entry feel larger.

What Floating And Open-riser Stairs Actually Are?

The two terms get used together, but they describe different things. An open-riser stair can sit on ordinary stringers and simply leaves the back of each step open. A floating stair goes further and hides the support entirely, so the treads seem unattached.

How the structure really works

Nothing floats. A mono-stringer runs a single steel beam up the centre under the treads, a hidden stringer buries the steel inside the wall or behind the treads, and a cantilever design bolts each tread into a reinforced wall with a concealed steel plate. The engineering is the whole job. Each tread on a cantilever stair has to carry a person at its far end without flexing, so the wall behind it is framed with steel or heavy blocking long before the drywall goes up. That is why these stairs are planned at the framing stage, not added later.

What The Quebec Code Requires?

Open does not mean unregulated. The Régie du bâtiment du Québec enforces the construction code that governs every staircase in the province, and open-riser and floating stairs have to satisfy the same safety rules as any other.

The two that shape the design most are guards and tread geometry. A guard has to block the passage of a 100 millimetre sphere, which limits how far apart the balusters, cables, or glass panels can sit. Treads need a consistent run and a uniform rise from top to bottom, because an inconsistent step is where people fall. Open risers are permitted in homes, though where young children are a concern many families still limit the gap between treads. We size every stair to the code first, then make it beautiful inside those limits.

Choosing Materials That Last In A Quebec Home

Element Common Choices What We Steer Quebec Clients Toward
Structure Steel mono-stringer, hidden stringer, wall cantilever Steel, powder-coated, for the stiffness open stairs need
Treads White oak, maple, walnut, engineered hardwood Solid white oak or maple, thick stock to resist flex
Guard Infill Glass panels, stainless cable, metal pickets Glass for sightlines, cable for a lighter look
Finish Site-finished, prefinished, hardwax oil Factory or hardwax oil, matched to the floor

The material question that matters most in Quebec is wood movement. A thick hardwood tread on a steel frame will shrink across its width when winter air dries the house out, so we condition the wood to the home and hold indoor relative humidity between 35 and 55 percent to keep gaps and squeaks from forming. Pair the treads with your flooring and the eye reads the stair and the floor as one surface. Our hardwood collections give you the species range to match.

Designing And Building A Custom Stair

A floating staircase is a custom fabrication, not a catalogue item. We start with a site measure, confirm the structure the design needs, and coordinate with your builder so the wall or slab is reinforced before finishing. Then the treads are milled, the steel is fabricated and powder-coated, and the whole assembly is dry-fit before final installation.

Because the structure and the millwork have to agree, these projects go best when the staircase and the surrounding custom millwork are drawn together. If you are weighing a fully custom build against a stock staircase, our comparison of custom versus prefabricated stairs walks through where the money goes, and our guide to stair railings and newel posts covers the guard options in more detail.

What I Tell Clients Before They Commit

“An open staircase is the one renovation where the structure and the finish cannot be separated,” says Sefi Dollinger, Owner of Planchers Bellefeuille, who has built stairs for Quebec homes since 1983. “People fall in love with the look in a magazine, then find out the wall had to be framed for it two months earlier. Decide on a floating stair early, build the structure to carry it, and it will outlast every trend in the house. Add it as an afterthought and you fight it the whole way.”

Frequently Asked Questions

Are floating staircases safe?

Yes, when they are engineered and built to code. Each tread is anchored to steel or a reinforced wall sized to carry a person at its far edge, and the guard, rise, and run all meet the Quebec Construction Code. The open look does not reduce the structural requirements, it just hides them.

Are open-riser stairs allowed in Quebec?

Open risers are permitted in homes under the provincial code. The guard still has to block a 100 millimetre sphere, and treads need a consistent rise and run. Families with young children sometimes limit the gap between treads even where it is allowed.

What is the best wood for floating stair treads?

Thick solid hardwood, usually white oak or maple, because the treads carry real load and should resist flexing and denting. We condition the wood to the home first, since a hardwood tread shrinks across its width in dry Quebec winters if the indoor humidity is left to swing.

Can a floating staircase be added to an existing home?

Sometimes, but it is harder and costlier than building it new, because the supporting wall or slab usually has to be opened and reinforced. It is far simpler to plan a floating stair during construction or a full renovation, while the framing is still accessible.

Do floating stairs work in a small space?

Often yes. By removing the risers and the closed stringer, a floating stair lets light and sightlines pass through, which makes a tight entry or a compact open-concept floor feel larger than a solid staircase would.

Thinking about an open staircase for a build or renovation? Visit the Saint-Jerome showroom to see tread samples and guard options in person, and bring your plans so we can tell you what the structure needs.